Aluminium Material
Aluminium and aluminium-alloy is a aluminium-based alloy family that commonly contains aluminum and nickel, with other alloying elements depending on the grade. Exact properties and suitability depend on the specified alloy, product form and operating conditions.
Aluminium is used for engineered components such as bearings, bushes, collars, flat bars, rods and flanges, particularly where strength, wear performance and resistance to corrosion are important.
SHIV ENTERPRISE supplies Aluminium products in different forms and configurations according to customer requirements, drawings, dimensions and application needs.
Aluminium Components.
SHIV ENTERPRISE offers a wide range of Aluminium components for engineering, machinery, industrial and manufacturing applications.
Engineered for Industrial Performance.
Our Aluminium product range includes bushes, bearings, half bearings, collar bushes, flats, rods and flanges.
Components can be supplied in standard sizes or manufactured according to customer drawings, specifications and dimensional requirements.
Aluminium Product Range
Aluminium Wire and Rod
Aluminium wire and rod for electrical, engineering and fabrication requirements.
Aluminium Tubes and Pipe
Aluminium tubes and pipes for specified fluid, thermal and industrial systems.
Aluminium Round and Hex Bar
Aluminium round and hex bars for machining and precision component manufacture.
Aluminium Flat and Bus Bar
Aluminium flats and bus bars for electrical distribution and fabrication applications.
Aluminium Coil and Strip
Aluminium coils and strips supplied for forming, fabrication and industrial use.
Aluminium Sheet and Plate
Aluminium sheets and plates for fabrication and engineering applications.
Aluminium Flange and Fitting
Aluminium flanges and fittings selected to match project requirements.
Aluminium Buttweld Fitting
Aluminium buttweld fittings for compatible piping and fabrication systems.
Aluminium Ring and Circle
Aluminium rings and circles for machining, fabrication and component production.
Aluminium Angle and Channel
Aluminium angles and channels for specified structural and fabrication needs.
Chemical Composition
The chemical composition of aluminium products varies by alloy designation, temper, product form and applicable standard. Commercially pure aluminium and aluminium alloys have different composition limits, and alloying elements may include magnesium, silicon, manganese, copper or zinc depending on the grade. Exact composition must be confirmed against the specified grade and material standard. The table below is a general guide, not a grade certificate:
| Element | Typical Composition |
|---|---|
| Aluminium (Al) | Balance; varies by grade |
| Other alloying elements | Present according to the specified alloy grade |
| Tin / Zinc / Other Elements | May be present depending on the specified alloy grade |
| Other Elements | Controlled according to the applicable alloy specification |
| Residuals | Controlled by the applicable grade standard |
Important: Aluminium chemistry varies by grade and product specification. Confirm exact chemical limits against the applicable material standard and mill test certificate before ordering.
Mechanical Properties
Typical mechanical properties depend on the exact Aluminium grade, manufacturing method, heat treatment and product form. Representative values may include:
| Property | Typical Value / Range |
|---|---|
| Tensile Strength | Depends on alloy grade and product form |
| Yield Strength | Grade dependent |
| Elongation | Depends on alloy grade and product form |
| Hardness | Depends on alloy grade and product form |
| Density | Confirm for the selected alloy grade |
Mechanical properties are indicative only. Actual values depend on the selected grade, casting condition, product dimensions and applicable specification.
Aluminium Product Range
SHIV ENTERPRISE offers Aluminium components for different industrial requirements. Products can be supplied according to required dimensions, drawings and specifications.
Aluminium Applications
Aluminium is selected for applications where low weight, corrosion resistance, formability or conductivity are important, depending on the selected grade and product form. It is used across engineering, electrical, fabrication, transport and general industrial applications. Aluminium is selected for applications where wear resistance, corrosion resistance, machinability and reliable performance are important.
Casting & Forging Solutions
SHIV ENTERPRISE also supports industrial requirements involving casting and forging. Components can be developed according to customer drawings, dimensions, material specifications and application requirements.
Our approach focuses on appropriate material selection, dimensional requirements and dependable supply for engineering and industrial applications.
Custom Requirements: Customers can provide drawings, specifications, dimensions or application details for product evaluation and supply requirements.
Available Forms & Sizes
Aluminium products can be supplied in standard or customer-required configurations, subject to grade, size and manufacturing requirements.
Your Trusted Metal Supply Partner
SHIV ENTERPRISE is a Mumbai-based manufacturer, stockist, supplier and worldwide exporter of ferrous and non-ferrous metal products.
We support customers with material sourcing, product supply, casting and forging requirements and solutions based on drawings, specifications and application requirements.
Aluminium FAQ
Aluminium is a lightweight non-ferrous metal available in commercially pure grades and a wide range of alloys. Depending on the grade and temper, it can offer a useful combination of strength, corrosion resistance, formability, thermal conductivity and electrical conductivity.
SHIV ENTERPRISE supplies Aluminium Wire and Rod, Aluminium Tubes and Pipe, Aluminium Round and Hex Bar, Aluminium Flat and Bus Bar, Aluminium Coil and Strip, Aluminium Sheet and Plate, Aluminium Flange and Fitting, Aluminium Buttweld Fitting, Aluminium Ring and Circle, and Aluminium Angle and Channel.
Yes. Aluminium is commonly used for bushes, bearings and other sliding components because of its combination of wear resistance, machinability and suitable friction characteristics.
Yes. SHIV ENTERPRISE can evaluate customer drawings, dimensions and specifications for Aluminium bushes and other engineered components.
SHIV ENTERPRISE supports casting requirements along with the supply of ferrous and non-ferrous metal products, subject to component specifications and application requirements.
Yes. SHIV ENTERPRISE is a worldwide exporter of ferrous and non-ferrous metal products and supports international supply requirements.
Aluminium products can be evaluated and supplied according to applicable dimensions, material requirements, drawings and customer specifications.
SHIV ENTERPRISE is located in Vasai East, Palghar, Maharashtra, India and supplies metal products to customers across India and international markets.
Need Aluminium Products?
Send us your required grade, dimensions, quantity or drawing for your requirement.