Copper Material
Copper and copper-alloy is a copper-based alloy family that commonly contains aluminum and nickel, with other alloying elements depending on the grade. Exact properties and suitability depend on the specified alloy, product form and operating conditions.
Copper is used for engineered components such as bearings, bushes, collars, flat bars, rods and flanges, particularly where strength, wear performance and resistance to corrosion are important.
SHIV ENTERPRISE supplies Copper products in different forms and configurations according to customer requirements, drawings, dimensions and application needs.
Copper Components.
SHIV ENTERPRISE offers a wide range of Copper components for engineering, machinery, industrial and manufacturing applications.
Engineered for Industrial Performance.
Our Copper product range includes bushes, bearings, half bearings, collar bushes, flats, rods and flanges.
Components can be supplied in standard sizes or manufactured according to customer drawings, specifications and dimensional requirements.
Copper Product Range
Copper Wire and Rod
Copper wire and rod for electrical, engineering and fabrication requirements.
Copper Tubes and Pipe
Copper tubes and pipes for specified fluid, thermal and industrial systems.
Copper Round and Hex Bar
Copper round and hex bars for machining and precision component manufacture.
Copper Flat and Bus Bar
Copper flats and bus bars for electrical distribution and fabrication applications.
Copper Coil and Strip
Copper coils and strips supplied for forming, fabrication and industrial use.
Copper Sheet and Plate
Copper sheets and plates for fabrication and engineering applications.
Copper Flange and Fitting
Copper flanges and fittings selected to match project requirements.
Copper Buttweld Fitting
Copper buttweld fittings for compatible piping and fabrication systems.
Copper Ring and Circle
Copper Angle and Channel for machining, fabrication and component production.
Copper Angle and Channel
Copper angles and channels for specified structural and fabrication needs.
Chemical Composition
The chemical composition of Copper varies by alloy designation, product form and applicable standard. Copper is a copper-based alloy family commonly alloyed with zinc and copper; some grades also contain iron, aluminum or other elements. Exact composition depends on the specified grade and standard. The indicative table below is for general guidance only:
| Element | Typical Composition |
|---|---|
| Copper (Cu) | Balance; varies by grade |
| Other alloying elements | Present according to the specified alloy grade |
| Tin / Zinc / Other Elements | May be present depending on the specified alloy grade |
| Other Elements | Controlled according to the applicable alloy specification |
| Residuals | Controlled by the applicable grade standard |
Important: Copper chemistry varies by grade and product specification. Confirm exact chemical limits against the applicable material standard and mill test certificate before ordering.
Mechanical Properties
Typical mechanical properties depend on the exact Copper grade, manufacturing method, heat treatment and product form. Representative values may include:
| Property | Typical Value / Range |
|---|---|
| Tensile Strength | Depends on alloy grade and product form |
| Yield Strength | Grade dependent |
| Elongation | Depends on alloy grade and product form |
| Hardness | Depends on alloy grade and product form |
| Density | Confirm for the selected alloy grade |
Mechanical properties are indicative only. Actual values depend on the selected grade, casting condition, product dimensions and applicable specification.
Copper Product Range
SHIV ENTERPRISE offers Copper components for different industrial requirements. Products can be supplied according to required dimensions, drawings and specifications.
Copper Applications
Copper is selected for applications where wear resistance, corrosion resistance, machinability and reliable performance are important.
Casting & Forging Solutions
SHIV ENTERPRISE also supports industrial requirements involving casting and forging. Components can be developed according to customer drawings, dimensions, material specifications and application requirements.
Our approach focuses on appropriate material selection, dimensional requirements and dependable supply for engineering and industrial applications.
Custom Requirements: Customers can provide drawings, specifications, dimensions or application details for product evaluation and supply requirements.
Available Forms & Sizes
Copper products can be supplied in standard or customer-required configurations, subject to grade, size and manufacturing requirements.
Your Trusted Metal Supply Partner
SHIV ENTERPRISE is a Mumbai-based manufacturer, stockist, supplier and worldwide exporter of ferrous and non-ferrous metal products.
We support customers with material sourcing, product supply, casting and forging requirements and solutions based on drawings, specifications and application requirements.
Copper FAQ
Copper is a copper-based alloy typically containing zinc and copper, with other alloying elements depending on the grade. It is selected for components that require strength, wear resistance and corrosion resistance.
SHIV ENTERPRISE supplies Copper Wire and Rod, Copper Tubes and Pipe, Copper Round and Hex Bar, Copper Flat and Bus Bar, Copper Coil and Strip, Copper Sheet and Plate, Copper Flange and Fitting, Copper Buttweld Fitting, Copper Ring and Circle, and Copper Angle and Channel.
Yes. Copper is commonly used for bushes, bearings and other sliding components because of its combination of wear resistance, machinability and suitable friction characteristics.
Yes. SHIV ENTERPRISE can evaluate customer drawings, dimensions and specifications for Copper bushes and other engineered components.
SHIV ENTERPRISE supports casting requirements along with the supply of ferrous and non-ferrous metal products, subject to component specifications and application requirements.
Yes. SHIV ENTERPRISE is a worldwide exporter of ferrous and non-ferrous metal products and supports international supply requirements.
Copper products can be evaluated and supplied according to applicable dimensions, material requirements, drawings and customer specifications.
SHIV ENTERPRISE is located in Vasai East, Palghar, Maharashtra, India and supplies metal products to customers across India and international markets.
Need Copper Products?
Send us your required grade, dimensions, quantity or drawing for your requirement.